Please select from the following:
LF101 Functions ONLY decoder
Silver Series Decoder
Power 1
Gold Series Decoders
BM-1 Block Management Module
RailCom- LRC120
LI101F-USB
LV102 Power Station
Locomotive BR 36.4
Set-LI with LocoCE®
LE1000 Value Line decoders
LS150 Accessory Decoder
LE101XF The new redesigned function only decoder from Lenz is now available. The good news is that we held the price down but are delivering 2 extra functions for a total of 6. The functions are fully mappable and offer special affects on all outputs.
Silver Series decoder is now in market. The "Silver" offers exceptional Silent Back emf performance, accesses Asymmetric DCC, and thermal/short protections for the 21st century!
The newest addition to the Silver line-up is the Silver MINI and the Silver Direct. The SIlver Direct has the NMRA plugs embeded on the underside of the PCB. It makes installation a snap.
Power 1 : Add-on Power for implementing USP Technology on Gold decoders
POWER-1 is an energy storage module for use with GOLD Series decoders. This storage unit supplies the decoder and the locomotive with power when there is an interruption of electrical connection to the track (e.g. dirty tracks).
The USP circuit of the GOLD decoders allows the decoder to receive the DCC signal without a direct electrical connection to the track. During the period where track electrical power is not present the USP circuit switches to the backup power provided from the POWER-1 storage module to ensure continued control of the motor. If digital information is no longer transmitted, the motor will be deactivated. This prevents the locomotive wheels from continuing to turn, for example: in the case of a derailment.
April , 2005: Automatic Braking Control (ABC) allows for precision stopping at selected locations such as in front of red signals or in front of a turnout thrown against the train.. The simple Block Management modules are used to tell the train to stop at a specific location. For example, when the locomotive decoder receives the “stop” signal status information, the train will stop, if the signal is "green", the train will continue unimpeded.
To combine ABC technology with the BM1 block section modules, it is necessary to use Digital plus GOLD series locomotive decoders or other decoders that support the ABC technology.
LRC120 RailCom Local Address Display
June 2005: Lenz announces the new LRC120 Local Address Display.
The address display LRC120 shows the address of a locomotive in a track section connected to the LRC120. This track section may be located at any point on your model railway layout.
March 2005: Lenz announces
the new
LI-USB computer interface for
connecting XpressNET to a USB port. MSRP $154.9
The LI-USB is packaged with:
1) Connecting cables for Lenz XpressNET
2) Connecting cable for USB port
3) CD “information and software demos for USB interface
Gold Series Decoders :Redefining Model Railroad Control!
Our New Gold Series decoders revolutionize model railroad control by incorporating three new technologies together with an advanced feature set to provide the industry’s most advanced NMRA DCC decoder. The Gold Series introduces a radical change in both performance and feature set.
Check out the 1 AMp Gold for HO, S, and some Large scale. The Gold Mini-w and Gold Mini-D's are now shipping. The Mini are typically used for small HO, N-Scale and Z.
Dec 2003 For about $8 per turnout you can now have full DCC control of your layout's switch machines!
Introducing the DIGITAL plus by Lenz LS150 turnout decoder, designed for cost effective turnout control for up to 6 independent turnouts.
* For control of any combination of 6 Atlas, Bachman, Kato, LGB, Peco, Tortoise, or other popular brands of twin-coil snap action or motorized switch machines.
* Support for 1024 accessory decoder addresses. Addresses for each output can be sequential or up to 6 independent addresses can be used
* High current provision to support Peco and Atlas switch machines with short protection on each output.
* Control using separate push-buttons is possible.
* Configuring the LS150 does not require a separate programming track and the parameters can be changed at any time in the future even after installation.
LV102 Power Station
April 2004: Lenz is pleased to announce the shipping of the new
LV102 power station. This unit
matches the power station in our LZV100. Allowing for full expansion of
additional power districts on your layout.
· Ultra clean DCC Track Power
· Adjustable DCC Track Voltage
·
Opto-isolation and 
thermal
protection for Safety
· Short and overload protection
· Designed to meet NMRA RP-9.1.2 Power Station Interface requirements
Includes RP-9.3.1 cutout device for RailCOm
LE1000 Value-Line Decoder
Sept 2003: The LE1000 joins the ranks for Lenz decoder.
This budget minded decoders allows you for equip all your fleet, even the
smallest industrial switcher.
Novemeber 2003: Lenz GmbH and KAM Industries have teamed up to provide the first truly wireless computerized DCC system. Set LI with Loco Ce® contains an LZV100 command station/power station, an LI101F high speed computer interface and the Loco Ce® software package. Requires user supplied computer, wireless HUB and wireless PDA.
Set-LI with Loco Ce® provide you with all the DCC hardware and software applications needed to turn your wireless PDA into a full NMRA DCC throttle. The use of the 802.11 wireless standards allows us to concentrate on the DCC hardware and software while fully exploiting the true potential of wireless applications. Set-LI with Loco Ce® is fully expandable and compatible with all XpressNet devices.