LE030 V5.1
NMRA DCC Decoder
The LE030 decoders are fully programmable in Register, Direct
and Paged programming. This allows for full programming with any
NMRA DCC Command Station or programmer. This gives owners of
these systems full access to these outstanding decoders from
Lenz.
The LE030 V5.1 Decoder:
World's
most advanced decoder, the first DCC decoder for N scale with
back EMF control for exceptionally fine slow speed control. The
LE030 supports all forms of R.P. 9.2.3 programming and offers
directional lighting, 28 speed steps, 10,000 addresses, and
advanced consist control, compatible with all DCC systems
Characteristics of this decoder are:
- Control of the motor's rotational speed (load
compensation). Regardless of the load, the motor's
rotational speed is kept nearly constant. During
extremely slow movement (For instance through sharp
curves and over a series of turnouts), the LE030 always
provides the motor with enough voltage.
- Selectable for operation with 14/27 or 28 speed steps.
- Operation on conventional DC layouts. This feature may be
disabled.
- Provides .7A continuous motor current.
- Two on/off function outputs with a current rating of
100mA each dedicated for the directional lighting.
- Support for Advanced Consist Control and Extended
addressing.
- Support for short form programming on the main for
acceleration and deceleration trim.
- Programmable locomotive address, acceleration, and brake
momentum, speed curve, and much more.
This decoder has now received a Conformance Warrant!!!
Size: L 1.4" x W .45" x H .12"
L 35.5 x W 11.5 x 3.3 mm
Warranty Information
Copyright 1995-2001 by Lenz Elektronik, GmbH. All Rights
Reserved
This page was designed by Debbie
Ames, owner tttrains