LE040 V5.1
NMRA DCC Decoder
The LE040 decoders are fully programmable in Register, Direct and Paged programming.
This allows for full programming with any NMRA DCC Command Station or programmer. This
gives owners of these systems full access to these outstanding decoders from Lenz.
The LE040 V5.1 Decoder:
World's most advanced decoder, the newest DCC decoder for N scale with back EMF control
for exceptionally fine slow speed control. The LE040 supports all forms of R.P. 9.2.3
programming and offers directional lighting, 28 speed steps, 10,000 addresses, and
advanced consist control, compatible with all DCC systems. This decoder's
Conformance Warrant is pending!!!
Characteristics of this decoder are:
- Control of the motor's rotational speed (load compensation). Regardless of the load, the
motor's rotational speed is kept nearly constant. During extremely slow movement (For
instance through sharp curves and over a series of turnouts), the LE040 always provides
the motor with enough voltage.
- Selectable for operation with 14/27 or 28 speed steps.
- Operation on conventional DC layouts. This feature may be disabled.
- Provides .7A continuous motor current.
- Two on/off function outputs with a current rating of 100mA each dedicated for the
directional lighting.
- Support for Advanced Consist Control and Extended addressing.
- Support for short form programming on the main for acceleration and deceleration trim.
- Programmable locomotive address, acceleration, and brake momentum, speed curve, and much
more.
Size: L .63 x W .57" x H .18"
L 16.0 x W 14.5 x H 4.5 mm
Warranty Information
Complete LE040
Manual in PDF Format
Copyright 1995-2001 by Lenz Elektronik, GmbH. All Rights Reserved
This page was designed by Debbie Ames, owner tttrains