The
industry's first truly universal fleet decoder for N and Z scales, the LE077XF represents
a whole new concept to the evolution of DCC. Not only is the LE077XF designed to use with
our own DIGITAL plus system, it is also designed to be at home on all the other popular
NMRA DCC systems.
The North American introductory MSRP for the LE077XF is $24.95.
The LE077XF micro decoder received the
NMRA Warrant for Conformance prior to being shipped!
To accomplish this we first built a decoder that was in full conformance to the NMRA Standards and RPs and then augmented the decoder to work well with all other major systems on the market. Although the LE077XF has a low price, it is packed with all the features you expect in a high end decoder. Independent or directional lighting (that can be dimmed using a function), advanced consist control, extended addressing, operations mode programming and full support for all the various speed step modes including 128 step motor control, are but a few examples of the advanced features found in the LE077XF.
Many characteristics of the LE077XF decoder can be programmed to customize the decoder to its locomotive. Please read "The Configuration Variables and Their Meanings" section later in this booklet for details on the configuration variables supported by the LE077XF. The LE077XF supports all forms of programming described in NMRA Recommended Practice 9.2.3 including the user friendly direct CV programming mode and the operations mode programming so that you can adjust values while the locomotive is in use. For example, you can operate the decoder with the factory pre-set speed table or generate your own. You can set which end of the locomotive is the forward end. You can even decide whether or not you want to be able to operate on conventional DC layouts.
The characteristics of the decoder are:
Size: L 0.53" x W 0.39" x H 0.14"
- Selectable for operation with 14/27, 28/55, 128 direct drive or 128 speed table mode with precision glide motor control.
- Two on/off function outputs with a current rating of 100 mA that can be configured for either directional lighting, full Rule 17 lighting, or lights and F1
- Headlights can also be dimmed using an extra function.
- Support for Advanced Consist Control and Extended Addressing
- Operation on conventional DC layouts is possible. This feature may be disabled.
- Full Support for operations mode programming (long and short) and full support for all forms of programming including the ultra fast Direct Mode as described in NMRA RP-9.2.3
- Rich set of properties which the user can set to customize the decoder to a particular locomotive.
- Provides .5A continuous motor current.
Complete Manual LE077XF in PDF format
Copyright 2001 by Lenz Elektronik, GmbH. All Rights Reserved
This page was designed by Debbie Ames, owner tttrains