Finally
a decoder with the quality of an LE103XF with a
JST connector. Finally
a decoder with the quality of an LE103XF with a
JST connector.
The characteristics of the decoder are:
- Selectable for operation with 14/27, 28/55, 128 direct drive or 128 speed table mode with precision glide motor control.
- Two on/off function outputs with a current rating of 200 mA that can be configured for either directional lighting, full Rule 17 lighting, or lights and F1
- Headlights can also be dimmed using an extra function.
- One additional function output that can be set to blink at a user settable rate and can be configured for any function output from F1-F8
- Support for Advanced Consist Control and Extended Addressing
- Smooth operation on conventional DC layouts is possible. This feature may be disabled.
- Full Support for operations mode programming (long and short) and full support for all forms of programming as described in NMRA P-9.2.3
- Rich set of properties which the user can set to customize the decoder to a particular locomotive.
- Provides 1A continuous motor current.
The LE102XF-JST comes with the newly designed 8-pin NMRA plug. We designed this plug in order to better protect the wires connecting to the pins at the solder joints. The new plug has the solder joints encased with molded plastic to prevent pulling on the wires.
The LE102XF-JST is sold in the following configurations
Size L 1.52" x W 0.67" x H 0.13"
L 40.5mm x W 17mm x H 3.3mm
Copyright 2001 by Lenz Elektronik, GmbH. All Rights Reserved
This page was designed by Debbie Ames, owner tttrains