LE104 V4.1NMRA DCC Decoder

The LE104 is fully NMRA DCC compatible and comes with the NMRA medium 8-pin plug, giving the insatller the most convenience for DCC ready locomotives.

These decoders are fully programmable in Register, Direct and Paged programming. This allows for full programming with any NMRA DCC Command Station or Programmer. This gives owners of these systems full access to these outstanding decoders from Lenz.

This economically priced decoder allows operators to truly achieve fleet installation.

Characteristics of this decoder are:

• Selectable for operation with 14/27 or 28 speed steps.
• Operation on conventional DC layouts. This feature may be disabled.
• Provides .1A continuous motor current.
• Two on/off function outputs with a current rating of 100mA each dedicated for the directional lighting.
• Support for Advanced Consist Control and Extended addressing.
• Support for short form programming on the main for acceleration and deceleration trim.
• Programmable locomotive address, acceleration, and brake momentum, speed curve, and much more.

Size: L 1.52" x W .67" x H .13"
L 40.5 x W 17 x H 3.3 mm

Plug Clearance: .12 ", 3.2mm
Wire lenght: 3.40", 86 mm

CV's Supported

Warranty Information

Copyright 1995-2001 by Lenz Elektronik, GmbH. All Rights Reserved
This page was designed by Debbie Ames, owner tttrains