LE110/111 V4.1NMRA DCC Decoder
The LE110/111 decoders are fully programmable in Register, Direct and Paged
programming. This allows for full programming with any NMRA DCC Compatible DCC Command
Station or Programmer. This gives owners of these systems full access to these outstanding
decoders from Lenz.
New anniversary pricing!! Ask your dealer.
The LE110 Decoder:
Characteristics of this decoder are:
- Selectable for operation with 14/27 or 28 speed steps.
- Operation on conventional DC layouts. This feature may be disabled.
- Provides 1 A continuous motor current.
- Four on/off function outputs with a current rating of 200mA each. Two of which are
dedicated for the directional lighting.
- Support for Advanced Consist Control and Extended addressing.
- Support for short form programming on the main for acceleration and deceleration trim.
- Support for all forms of programming as described in NMRA RP- 2.3.
- Programmable locomotive address, acceleration, and brake momentum, speed curve, and much
more.
Size: 1.04" X .67" X .26"
L 26.5 x W 17 x H 6.5 mm
Warranty Information
Complete Manual
in PDF format
Copyright 1995-2001 by Lenz Elektronik, GmbH. All Rights Reserved
This page was designed by Debbie Ames, owner tttrains