LE122 V4.1 NMRA DCC Decoder

The LE122 decoder is designed for converting locomotives with universal motors (used in AC operation) for use with DCC.  Marklin 3 rail locomotives are an example of locomotives with motors of this type.

The LE122 decoders are fully programmable in Register, Direct and Paged programming. This allows for full programming with any NMRA DCC Compatible DCC Command Station or Programmer. This gives owners of these systems full access to these outstanding decoders from Lenz.

The LE122 Decoder:

Characteristics of this decoder are:

• Selectable for operation with 14/27 or 28 speed steps.
• Operation on conventional DC layouts. This feature may be disabled.
• Provides 1 A continuous motor current.
• Four on/off function outputs with a current rating of 200mA each. Two of which are dedicated for the directional lighting.
• Support for Advanced Consist Control and Extended addressing.
• Support for short form programming on the main for acceleration and deceleration trim.
• Support for all forms of programming as described in NMRA RP- 2.3.
• Programmable locomotive address, acceleration, and brake momentum, speed curve, and much more.

Size: 1.04" X .67" X .26"
L 26.5 x W 17 x H 6.5 mm

CV's Supported

Warranty Information

Complete Manual in PDF format

Copyright 2001 by Lenz Elektronik, GmbH. All Rights Reserved
This page was designed by Debbie Ames, owner tttrains