LE130/131 V5.1
NMRA DCC Decoder
The LE130/131 decoders are fully programmable in Register,
Direct and Paged programming. This allows for full programming with any NMRA DCC
compatible Command Station or Programmer. This gives owners of these systems full access
to these outstanding decoders from Lenz.
This decoder has received the NMRA Conformance Warrant.
LE130 Manual
in PDF Format
The LE130/131 Decoder:
Characteristics of this decoder are:
- Control of the motor's rotational speed (load compensation). Regardless of the load, the
motor's rotational speed is kept nearly constant. During extremely slow movement (For
instance through sharp curves and over a series of turnouts), the LE130/131 always
provides the motor with enough voltage.
- Selectable for operation with 14/27 or 28 speed steps.
- Operation on conventional DC layouts. This feature may be disabled.
- Provides 1 A continuous motor current.
- Four on/off function outputs with a current rating of 200mA each. Two of which are
dedicated for the directional lighting.
- Support for Advanced Consist Control and Extended addressing.
- Support for short form programming on the main for acceleration and deceleration trim.
- Support for all forms of programming as described in NMRA RP- 2.3.
- Programmable locomotive address, acceleration, and brake momentum, speed curve, and much
more.
Size: 1.04" X .67" X .26"
L 26.5 x W 17 x H 6.5 mm
Warranty Information
Complete Manual in
PDF format
Copyright 1995, 1996, 1997 by Lenz Elektronik, GmbH. All Rights Reserved
This page was designed by Debbie Ames, owner tttrains