LE135 V5.1
NMRA DCC Decoder
The LE135 decoder is fully programmable in Register, Direct and Paged programming. This
allows for full programming with any NMRA DCC Command Station or programmer. This gives
owners of these systems full access to these outstanding decoder from Lenz. World's most
advanced decoder, the newest DCC decoder for larger scales with back EMF control for
exceptionally fine slow speed control.
This decoder's Conformance Warrant is pending!!! We have received notification of
passing the testing and are waiting for the Warrant from the NMRA.
Characteristics of this decoder are:
- Control of the motor's rotational speed (load compensation). Regardless of the load, the
motor's rotational speed is kept nearly constant. During extremely slow movement (For
instance through sharp curves and over a series of turnouts), the LE135 always provides
the motor with enough voltage.
- Selectable for operation with 14/27 or 28 speed steps.
- Operation on conventional DC layouts. This feature may be disabled.
- Provides 1.3 A continuous motor current.
- Three on/off function outputs with a current rating of 200mA , two of which are
dedicated for the directional lighting.
- Support for Advanced Consist Control and Extended addressing.
- Support for short form programming on the main for acceleration and deceleration trim.
- Programmable locomotive address, acceleration, and brake momentum, speed curve, and much
more.
- NMRA RP-9.1 medium plug.
Size: L 1.12" x W .83" x H .22"
L 28.4 x W 21 x H 5.5 mm
Warranty Information
Complete LE135
Manual in PDF Format
Copyright 2001 by Lenz Elektronik, GmbH. All Rights Reserved
This page was designed by Debbie Ames, owner tttrains